The Recruitment Process Methods - 2479 Words

1. Introduction The purpose of this academic assignment is to prepare a portfolio of documents that will illustrate examples of most effectively practiced recruitment methods. Several documents that best reflected efficient internal and external recruitment methods, productive interview design structures, useful tests used in the selection process of recruitment and effective induction procedures were compiled. The portfolio of documents will then be analyzed and examined so as to provide an in-depth understanding on the usefulness and importance of such recruitment methods on the recruitment process. Upon analysis and examination of the aforementioned documents, several suggestions to improve and enhance the already effective†¦show more content†¦Therefore, this specific aptitude test is effective as there is test reliability and validity (Bambach, 2010). 2.7. Personality Tests Appendix F demonstrates the Myers-Briggs Type Indicator (MBTI) personality test. This test allows recruiter to assess whether a candidate is Extraverted or Introverted, Sensitive or Intuitive, more prone to Think or Feel and whether the candidate is more Perceptive or Judging. Such is effective as the employer will be able to determine whether the personality of the candidate is suitable with the job description of the vacant position and with the organizational culture of the company (McShane Travaglione, 2007). Appendix G illustrates the Big Five Personality Test. Similarly to the MBTI, the Big Five Personality Test allows a recruiter to effectively determine the suitability of a potential candidate by scoring the candidate’s level of extroversion, neuroticism, conscientiousness, agreeableness and openness (McShane Travaglione, 2007). 2.8. Effective Induction Procedures Appendix H provides a very concise, informative and detailed induction schedule. This induction schedule will serve as a very effective work procedure as it includes careful planning, introducing the new employee to the company, supervised induction programme, meeting with Human Resources to clarify employment conditions,Show MoreRelatedResourcing Talent1241 Words   |  5 Pagesplanning process. Studying this unit will enable learners to understand the factors that impact on an organisation’s resourcing and talent planning activities. They will learn about the relationship between recruitment and selection by identifying the key stages in each separate but related process. The benefits to the organisation of attracting and retaining a diverse workforce will be emphasised. They will be able to make a positive contribution to the recruitment and selection process by developingRead MoreA Study on Recent Trends in Selection and Recruitment in Private Sectors969 Words   |  4 PagesTITLE OF THE STUDY: A study on recent trends in selection and recruitment in private sectors INTRODUCTION: Recruitment and Selection are simultaneous process and are incomplete without each other. They are important components of the organization and are different from each other. It also contains addresses of various and top placement consultants and the pricelist of advertisements in the magazine. Recruitment is the process of attracting job candidates with the right characteristics andRead MoreHrm. Recruitment and Selection Report1715 Words   |  7 PagesManagement. Recruitment and selection report. February 2008 1770 Words Human Resources Management. Human Resources Management (HRM) is described by Michael Armstrong in A Handbook of Human Resource Management Practice as â€Å"strategic and coherent approach to the management of an organizations most valued assets - the people working there who individually and collectively contribute to the achievement of the objectives of the business† . One of the main parts of HRM is the process of recruitmentRead MoreRecruitment and selection process1714 Words   |  7 Pages Recruitment and selection process Recruitment is the process of having the right person, in the right place, at the right time. It is crucial to organisational performance. Recruitment is a critical activity, not just for the HR team but also for line managers who are increasingly involved in the selection process. All those involved in recruitment activities should be equipped with the appropriate knowledge and skills. Before creating business plans or making decisions, it is important to scanRead MoreRecrutment and Selection in a Manufacturing Industry1711 Words   |  7 Pagesbusiness competition is increasing day by day. In order to face the competition there must be an efficient as skilled workers. So in this situation the organization must give more importance for recruitment and selection of employees, in such organization. So this is a project based on recruitment and selection of personals by visiting a firm. As a part of this project we the students of 2nd B-com, visited â€Å"South Indian Metal Company 1(SIMCO)’, kulappully and we collect the related documentsRead MoreEssay about Advantages of Online Recruitment1356 Words   |  6 PagesQuestion one (350 words, 35 marks) One of the recruitment/selection methods currently being used by organizations is online recruitment. Explain what is meant by recruitment, online recruitment and describe the advantages of online recruitment. Support your answer with examples and evidences from the case study . One of the most important things in a company or business is the employment of suitable employees. Any successful organization must pay great attention on the selection of its employeesRead MoreRecruitment Plan1486 Words   |  6 Pagesthe recruitment and selection of a Restaurant hostess for the Waterfront Hotel, New Plymouth. This report is comprised of identifying job positions, job analysis, job description and selection process, so as to follow a systematic procedure during the recruitment process of the Restaurant Manager. Objectives The objective of this report is to develop a systematic recruitment plan for the Restaurant Manager. Contents The contents of this report are:- * Literature review of recruitment planRead MoreRecruitment Process : An Effective Recruitment1440 Words   |  6 PagesRecruitment method: Recruitment process begins when there is a need for a new person in an organization. The need can occur due to a new position to work in an organization or the person responsible for work left. After we have analyzed the job requirements and came up with a perfect job description and job specification, then we are in a position to take the analysis to a further level by making an effective recruitment plan. There are enormous recruitment plans, which are used to get the perfectRead MoreStaffing Organizations: Recruitment Strategy1880 Words   |  7 PagesSTAFFING ORGANIZATIONS 2 Staffing Organizations Introduction Recruitment is among the many functions of every organizations human resource management that critically influences the organizations performance. There is a negative impact on the organizational performance and goal achievement limited by poor decision making concerning the recruitment process. Companies should implement effective recruitment and hiring strategies aiming at acquiring skilled personnel for every job position. ThisRead MoreRecruitment Methods For Hiring The Best Qualified Candidate For A Position1594 Words   |  7 PagesRecruitment is the process of finding and hiring the best-qualified candidate for a position in an organization. Effective recruitment is the foundation for any organization’s success. This process can be a very costly exercise so it is essential for businesses to do it right. Finding the find best possible candidate can be challenging and it is the job of the Human Resource team to recruit talent that will help move an organization forwar d and make it successful. There are a variety of different

The Theory Of Self And Memory - 1598 Words

Personal identity has been, and will arguably remain, a major area of debate and discussion amongst philosophers, both in Western and Eastern branches of academia. Indeed, this idea that personal identity- more commonly referred to as â€Å"the self†- remains constant, despite any and all qualitative changes that can occur to a person, has left many philosophers ever so puzzled. Nevertheless, four main theories have been developed in an effort to best explain both the existence of the self and how it can persist through any period of time. Some follow on Rene Descartes theory, where the soul can be assigned the role of the self. Others prefer the one John Locke had proposed, where the self and memory are related. Others still argue that animalism, the view that the person body and the self are the same entity, is a better explanation. Then there are those who follow on the Buddhist teachings of the Anatta, a theory that argues against the very idea of the self. Amongst these f our main theories, the Buddhist theory of Anatta, the idea that the self does not exist, is arguably a better explanation of the self, for it is less problematic than the others can be. The initial problem in theorizing over the matter of the self is found in the idea of individual continuity, of persistence in more than just qualitative features over time. In the most intuitive of senses, the idea of the self can be simplified to terms of the persistence of personal identity over any period of time.Show MoreRelatedThe Theory Of Personal Identity988 Words   |  4 Pagesobvious but yet it again it is not as we must be able to define what and who our enduring self is. In this paper, I will argue that we should identify ourselves through our individual soul, thus supporting the same soul theory. By having the same soul, we are the same person. I will support this argument by giving a brief overview of all the theories of personal identity then stating the objection of the same soul theory using the same body and same mind theorist. Last but not least, I will then respondRead MoreAnalysis Of John Locke And The Problem Of Personal Identity1622 Words   |  7 Pagescap able of self-awareness. Locke emphasizes on self-awareness because he insists that it is one thing to be aware that you are looking at something, but it is different to be aware that you are aware that you are thinking about or looking at something. This is what Locke defines as consciousness – to be self-aware or to be aware of one s surroundings. It is through consciousness alone, Locke argues, we become more than just a man or an animal and instead become to the realization of the self. The selfRead MoreLearning Theories Explain The Connection Of Fear And Avoidance Of The Trauma1070 Words   |  5 PagesContemporary Directions in Theory, Practice, and Research (Ringel Brandell, 2012), the approaches I elected to focus on are CBT and PTSD, EMDR, SIT, and The Self-Trauma Model. CBT and PTSD: CBT (Cognitive Behavioral Therapy) approach can go to two directions. The first direction is learning theory, and the second is emotional processing theory (p. 15). The learning theories relate to behavioral approach aiming to change behavior by controlling environmental signs. These learning theories explain the connectionRead MorePersonal Identity - Memory Theory vs Body Theory vs Soul Theory1634 Words   |  7 Pagesthe Memory Theory of Personal Identity is the closest to the truth. I will do so by showing that the opposing theories – Body and Soul Theories – have evident flaws and that the arguments against the Memory Theory can be responded to adequately. In order to succeed in this task, I will explain the basis of the three aforementioned theories are, examine the Memory Theory’s main arguments, acknowledge and respond to the arguments against it and demonstrate that the Memory Theory is the theory closestRead MoreLocke And John Lockes Theo ry On Personal Identity860 Words   |  4 Pages Personal Identity or ‘Self’ has been a very important topic for philosophers for many years. Personal identity is how you describe or think of being which is derived from memories that have taken place over the years. John Locke was a philosopher who believed that your ‘Self’ or personal identity come from memory which is also referred to as consciousness in Locke’s writings. Locke believed that you are who you are, because your thoughts are yours alone no matter the vessel. However, in this paperRead MorePersonal Statement : Personal Identity1267 Words   |  6 PagesIdentity Many ancient philosophers were fascinated with the idea of the personal identity. This is often referred to as the â€Å"self†. The â€Å"self† is considered to be something that is not physical, therefore the search to discover the â€Å"self† is not concrete. With the â€Å"self† being something that has no physical element, many philosophers have different opinions on what the â€Å"self† is and how it functions. â€Å"Someone s personal identity in this sense consists of those features she takes to â€Å"define her asRead MoreSelf-Identity Qualities1010 Words   |  4 Pagessomeone else. Thus, self- identity is how one characterizes themselves as an individual. This may at first seem easy to conclude. One might say I am me because I look in the mirror and recognize myself. Or, I am me because I possess a mind and memories unique to me that cannot be replicated by another in the same perspective. However, the body and the mind undergo constan t change throughout life, so how can they be attributed to one’s â€Å"sameness†? I have arrived at the problem of self-identity, what makesRead MoreThe Body, Soul, And Brain1426 Words   |  6 Pagessurvival of the self, it is difficult to say what defines a person throughout time. The three arguments are for the body, soul, and brain. These theories argue that each respective component of a person, must remain the same throughout time in order for a person to be unchanged. The brain theory is more plausible than its counterparts. To prove this, first, I will describe the soul and body theories, which I oppose, and then present an argument based on the brain transplant theory. A criticism forRead MoreHume s Identity Of A Man Is A Fiction888 Words   |  4 PagesHume believes that personal identity is not the feeling of existence of what is called the self as many philosophers believe. He proposes that every idea is the product of one impression. The self is not one impression, but is all of our impressions that combined Impressions could be pain, pleasure, grief, or joy, but they do not happen at the same time, they follow each other. Hume uses the theater analogy to explain this (Hume). The mind is the stage where perceptions make their appearance. TheyRead MorePersonal Identity And Social Identity1241 Words   |  5 Pagesperson to his/her theory view will be summarized and a counterexample will be provided to attempt to disprove the brain view, this will also be done for the the memory continuity theory. Then, the psychological continuity theory will be provided as the most probable The brain-as-person theory and the memory continuity theory seem to be plausible but do not accommodate the existence of personal identity as well as the psychological continuity theory. At one point in time, the theory that a human being

Radio Frequency Identification-Free-Samples -Myassignementhelp

Question: Evaluate the use of Radio Frequency Identification (RFID) technology. Answer: Introduction Radio Frequency Identification is a wireless technology which enables us to gather data about a certain item without needing to touch that object; the information is gathered through the use of inductive coupling or electromagnetic waves. A RFID system can be divided into three components; a scanning antenna, transceiver and a transponder (the tags). The data or information is carried in a microchip attached to the antenna (together called transponder or tag) and the transceiver helps to send the data back to the scanner, and from there that information is sent to a host computer. Every tag has its own read and writes memory which allows the RFID system to detect the objects and perform work on it. The antenna is used to sends short bursts of radio signals and by doing this; it provides a way of communication with the transponder and gives the RFID tag to communicate back with that energy This report shows us the advantages of RFID technology and the practical use of this technology (Zhu, Mukhopadhyay Kurata, 2012). Technical Problems RFID has Overcome: - RFID is used for automatic identification of products or people; the main advantage of an RFID system over traditional methods such as bar codes is that it does not require physical contact or proper line of sight for the technology to work. It is also used for tracking and tracing items automatically. RFID system implementation adds intelligence and minimizes human intervention to the process of item identification and processing those products using electronic tags. RFID tags does not need a battery; so they can used for longer periods of time as they would not run out of juice (Mayordomo et al., 2013). Some libraries use RFID technology for peoples convenience which allows them to take books out or return them. It can be also helpful for finding missing books and finding misfiled books, by using a hand held battery operated RFID reader (Dwivedi et al., 2013). Sub-dermal tags are implanted under the skin of peoples or animals. It is mainly used for tracking animals and keeping a count of the animals. It is mainly used for studding the migration pattern of fish, by tagging them and keeping track of them at regular intervals. This technology can also be used for accessing secure computers without using a username or password, just by simply implanting a tag under their palm and waving their hand in front of the monitor (Hill, 2012). Many access controlled devices uses smart cards, which need to be swiped in a reader. When an individual uses a smart card for entering into an authorized room, an unauthorized person slips behind him without the system knowing of it. However, when using RFID, a person with a tag comes into range, the scanner or reader detects the person automatically (Chen et al., 2012). Technological limitations of RFID:- Radio Frequency Identification technology has been applied effectively, it has some technical barriers that need to be optimized for application. Some of those limitations are discussed below. Collisions: - When attempting to read several tag at a time the signals from different readers results in collision, and data loss happens. To prevent collisions from happening anti-collision algorithms are put in the readers (Jia et al., 2012). Jamming: - RFID systems use the electromagnetic spectrum; they can be very easily jammed, using the right high frequency signals. This could cause problems in stores and be highly disruptive to the environment, and can be disastrous in places like hospitals and military fields where RFID is largely used (Avanco et al., 2015). Tag collisions: - It happens when many tags are present in a small area, to overcome this sort of problem vendors can make systems that responds to tags one at a time (Yang et al., 2013). New Problems Created by RFIDs Limitations:- RFID tags cannot differ between one reader and another. Its scanners are very portable and they could be read from far, which in allows anyone with a portable RFID Some RFID tags are very small and very difficult for consumers to remove them; some of them are even hidden or embedded in the product where consumers cannot see them. RFID systems are designed in a way that tags and readers are kept at a minimum distance for them to work. However, a high-gain antenna could be used to read tags from far distances, resulting in privacy problem (Metzger et al., 2013). Products have unique bar codes, when those products are sold to consumers and paid with credit cards the RFID tag of that particular item can be associated with that credit card number. That can be unsecure for the consumers and thus it becomes a hindrance to RFID technology. Implementation of RFID Technology in an Organization:- Companies from all over the world are using RFID technology for supply chain management. Wall-Mart implements RFID technology for managing inventory more efficiently, reduce data entry error and human labor costs are reduced in the distribution hub of the company. Wall-Mart uses the data collected from RFID system to keep track of the stock and check whether the stock is running low and reduces labor costs. Wall-Mart can track the movement of the inventory which increases inventory standards and speeds up the physical aspects of the inventory process, products can be shipped and received faster, and it becomes easy for the organization to predict product demand. RFID helps shoppers to save time when shopping, products does not go out of stock as the system is constantly tracking every development. Implementation of RFID gets shoppers better deals as the systems are becoming more efficient, reducing inventory of obsolete products, the correct products are available at the right places in the stores and reduces thefts, misplacement and better placement of data sensitive inventory, all of these factors effectively boosts sales of the products (Zelbst et al., 2012). RFID Technologys Prospects in the Market Place:- Major limitations to associate RFID technology are explained below. There are no RFID standards for implementation. The demand for this technology should also have driven down its prices. Many organizations dont use RFID because of its price range. RFID technology cannot read through liquid and metals. Some items read rates can be very low. So RFID tags respond late and have a delayed response which in slows the whole process. Interruption to RFID chips signals could happen because of other RFs signals or conveyor belts present in the organization. To effectively implement RFID technology the warehouse and vehicles have to be fitted with readers and they need to be connected to the organizations computer network for information exchange. All of these changes results in increase of expenses. There is no standardization of software, hardware and network protocols. Better RFID systems with much low cost and privacy issues are to be used. If possible to overcome the above problems, unify the industry with standards and convince users of this technologys benefits then RFIDs future looks favorable (Reddy, 2012). Conclusion Therefore from the above discussion it can be concluded that even with many shortcoming and issues that obstructs the global application of RFID, it can be seen that organizations with complex supply chain management process benefits from its application, once the difficulties of its applications are dealt with. If organization incorporates this RFID technology it reduces human errors, increase tasks accuracy and improve safety. Although sole usage of RFID cannot have advantage if we want proper results we have to incorporate it with organizations supply chain management References Avanco, L., Guelfi, A. E., Pontes, E., Silva, A. A., Kofuji, S. T., Zhou, F. (2015, October). An effective intrusion detection approach for jamming attacks on RFID systems. InRFID Technology (EURFID), 2015 International EURASIP Workshop on(pp. 73-80). IEEE. Chen, Y. Y., Huang, D. C., Tsai, M. L., Jan, J. K. (2012). A design of tamper resistant prescription RFID access control system.Journal of medical systems,36(5), 2795-2801. Coustasse, A., Tomblin, S., Slack, C. (2013). Impact of radio-frequency identification (RFID) technologies on the hospital supply chain: a literature review.Perspectives in Health Information Management, (Fall). Dwivedi, Y. K., Kapoor, K. K., Williams, M. D., Williams, J. (2013). RFID systems in libraries: An empirical examination of factors affecting system use and user satisfaction.International Journal of Information Management,33(2), 367-377. Hill, N. P. R. (2012).U.S. Patent No. 8,240,085. Washington, DC: U.S. Patent and Trademark Office. Jia, X., Feng, Q., Fan, T., Lei, Q. (2012, April). RFID technology and its applications in Internet of Things (IoT). InConsumer Electronics, Communications and Networks (CECNet), 2012 2nd International Conference on(pp. 1282-1285). IEEE. Mayordomo, I., Drger, T., Spies, P., Bernhard, J., Pflaum, A. (2013). An overview of technical challenges and advances of inductive wireless power transmission.Proceedings of the IEEE,101(6), 1302-1311. Metzger, C., Thiesse, F., Gershwin, S., Fleisch, E. (2013). The impact of false-negative reads on the performance of RFID-based shelf inventory control policies.Computers Operations Research,40(7), 1864-1873. Reddy, M. V. R. (2012). Status of supply chain management in India.International Journal of Emerging Technology and Advanced Engineering,2(7), 429-432. Yang, P., Wu, W., Moniri, M., Chibelushi, C. C. (2013). Efficient object localization using sparsely distributed passive RFID tags.IEEE transactions on industrial electronics,60(12), 5914-5924. Zelbst, P. J., Green, K. W., Sower, V. E., Reyes, P. M. (2012). Impact of RFID on manufacturing effectiveness and efficiency.International Journal of Operations Production Management,32(3), 329-350. Zhu, X., Mukhopadhyay, S. K., Kurata, H. (2012). A review of RFID technology and its managerial applications in different industries.Journal of Engineering and Technology Management,29(1), 152-167.

Industrial Waste Water Treatment for Textile - MyAssignmenthelp

Question: Discuss about theIndustrial Waste Water Treatment for Textile. Answer: Introduction: Industrial waste water treatment is the process used in industries to effectively treat effluents and waste water that come out as efflux from by-product of industries. This helps in reusing the water and protecting the environment from contamination. This helps to preserve the recreational values of water and also reduce negative health impact in community. Many types of pollutants are found in waste water such as decayed organic matter, excessive nutrient, chorine compounds, metals and other toxic substance. All this can have a harmful impact on the ecosystem and acts as threat for human health, aquatic life and wildlife too. Hence, treating water and waste is necessary in all industries. This report particularly analyzes the process of waste water treatment in textile industries and identified the problem in the process. It also seeks to find solution effectively treat the water produced from such industries. Waste Water Treatment Process and Problems Involved: Waste Water Produced in Textile Industry Textile industry is the highest growth industry that contributes to the economic growth of countries. However, the problem seen in these industries that high amount of water is consumed in the production of textiles and it also results in discharge of high amount of waste water. The most important source of contamination is the released of dyes from this industry after fibre dyeing and finishing process. Textile fibres produced in textile industries mainly consists of two types such as the natural fiber and the manufactured fiber. 90% of the organic dye used in industry are utilized in fibers and the rest is released as industry effluent (Pang Abdullah, 2013). The dyeing and finishing processes in this industry is the major contributor to pollution as it requires use of large amounts of chemicals and organic dyes. As water is used as a medium to apply dyes in fabric for finishing, some of the products end up as waste. Most of the waste contains high amount of suspended soli, nitroge n, heavy metals. During the manufacturing process of textiles, many anti-microbial agents resistant to biodegradation are used. Hence, according to environmental legislation, it is necessary to treat the dye-containing effluents before disposal into water bodies (Ozturk et al., 2015). Characteristics of Textile Industry Effluent Textile fiber products are manufactured in textile industries by means of series of mechanical process such as dry treatment and wet treatment. Dry treatment process includes spinning, weaving, knitting and fiber production, whereas the wet treatment process includes pretreatment by desizing, bleaching and mercerizing followed by dyeing, printing and finishing process. Hence, wet treatment requires high consumption of water and application of extensive organic dyes in the dyeing and finishing process resulting in high chance of environmental pollution and health related risk (Savin Butnaru, 2008). Figure 1: Process followed in textile industry. Source: (Information about the textile industry - Efficiency Finder, 2017) The waste water coming out after this process is high in Ph, temperature, toxicity, biochemical oxygen demand, suspended solids and total organic carbon. Textile industry is one of the major source of serious pollution issues. The colour of the dye is not the main reason for problem, rather the breakdown products that the dye releases contributes to toxic and carcinogenic characteristics (Carmen Daniela, 2012). Therefore, textile industry follows various process to treat water and meet legislative requirement for treatment of water and waste water. Figure 2: Characteristics of textile effluent. Source: (Pang Abdullah, 2013). Process Followed for treatment of textile industry effluent and challenges in the process Textile industry follows advanced methods for the treatment including adsorption, ion exchange, membrane filtration, reverse osmosis, ozonation, evaporation and many others. Four level of treatment is used for waste water treatment which are as follows: Use of preliminary treatment by means of physical methods to removes large solids and greases in water. Use of primary treatment by utilizing physical and chemical methods to remove suspended solids and organic matters in waste water. Use of secondary treatment by using biological and chemical methods to eliminate biodegradable organic matter and suspended solids. Use of tertiary methods to remove residual suspended solids. This can be done by means of physical, biological and chemical methods (Verma, Dash, Bhunia, 2012). Many combination of treatment process is used to treat waste water and safely dispose them without causing environmental risk and threats. Although many advanced technique of physical, chemical, electrochemical methods is available for treatment of effluent, many of the methods are time consuming and need large operational areas. Some of the methods have been found to be ineffective in treating toxic elements contained in waste water. For example, the biological treatment by means of aerobic and anaerobic process is not successful because in anaerobic condition, the azo dye is converted to hazardous aromatic amines (Khandegar Saroha 2013). Advanced oxygen process (AOP) is useful to overcome this limitation in other technique as it sufficiently removes organic matters, traceable organic contaminant and inorganic pollutants prior to biological treatment of effluents. Currently, metal oxide semiconductors are used in AOP treatment of waste water containing dye because of its degradatio n efficiency and low toxicity properties. As dye waste water is the reason for environmental and health problems, the innovative approach of AOP was proposed to treat waste water. This process uses the OH radicals to trigger a reaction leading to the breakdown of azo dye molecules into less harmful substances. On the other hand, the semiconductors photocatalyst used in the process promotes wide application of the process, as it is less expensive and does not cause any loss on photocatalytic activity. Currently, titanium oxides, zinc oxide and molybdate has been identified as effective phtocatalysts for the degradation of dye in waste water (Chan et al., 2011). However, this process is not widely used in textile industry because the overall cost is high. Its operating condition is very specific which increased the installation and operating cost. The study by Khandegar Saroha, (2013) gives insight into the process of electrocoagulation for treatment of textile industry effluent. This has been considered effective than other methods because of its versatility and compatibility with the environment. The effluent generated in the sizing, dyeing, fining and scouring process contains salts, dye, alkali and cleaning solvents. The salt released from the effluent may result in soil infertility and damage of aquatic life. Electro-coagulation has been regarded as a simple and effective process for the treatment of waste water and this fact is supported by many research studies (Aoudj et al., 2010) it has helped to remove heavy metals from waste water, on the other hand it also facilitate removal of arsenic, sulfide, nitrate and chromate. This technique is facilitated by the use of current source between metal electrodes and dipping it in the effluent. The metal ions form a wide range of coagulated species that aggregate and absorb dis solved contaminants. The study has been found to be effective when combined with other treatment methods. However, the removal efficiency for pollutants is high in electrocoagulation method compared to other methods. Another study gave the idea that decolorization and detoxification of textile industry effluent can be done by means of Pseudomonas bacteria. Apart from bacterial treatment, fungal treatment is also done in textile industry. However, fungal treatment is not effective because optimum activity of the enzyme is dependent on low pH requirements. Bacterial decolorization process has been considered effective because it involves oxidoreductive enzymes such as laccase and azoreductase. By means of the study on the best strain for biodegradation, it was found that Pseudomonas sp. has the ability to degrade and detoxify textile industry effluent. It helped in eliminating the waste water characteristics of chemical oxygen demand (Telke et al., 2010). On the other hand, Khlifi et al., (2010) proposed the decolorization and detoxification of textile industry wastewater by means of laccase mediator system. However, this study conclude that simple decolorization technique cannot result in detoxifi cation as the industry effluent is till toxic despite the use of most effective synthetic mediators. Chemical coagulation or flocculation technique is also regarded as a technology for removing color in textile waste water. This process involves the addition of chemicals in water to change the physical state of dissolved solids and suspended solids. This facilitates sedimentation process of the waste product. However, this process is sometimes disrupted by the entrapment of large coagulant. Hence, this process can be utilized only in the pretreatment process to remove waste materials in suspended forms that takes much time to settle down. Although the overall cost of this treatment is high, however this process is limited by the production of large amount of sludge in the effluent. In addition, the decolorization process is not effective for all soluble dyes (Verma, Dash, Bhunia, 2012). It can be successful only if small amount of dye is treated, however this cannot be feasible in textile industry where large amount of effluent is generated. Solutions to the Treatment Process The analysis and evaluation of different treatment processes used in the textile industry revealed weakness and limitations of many approaches. This limitation may severely challenges and cause problem in textile industry if waste water treatment is not adequately managed. Hence, it is necessary that an appropriate solution to the weakness is identified to promote efficiency in the waste water treatment process. In relation to the used of laccase mediators for detoxification of waste water, it was found ineffective in eliminating the toxicity levels in water. The natural mediators like acetosyringon can solve this issue. The effectiveness of the mediator can be judges by pre-toxicity screening test by means of bioluminescence test to gain idea about the overall toxicity of waste water and dye effluents in the industry (Khlifi et al., 2010). On the other hand, different technique of decolorizatoon method was also ineffectiveness either due to high cost or due to lack of ineffectiveness in achieving decolorization. Apart from laccase mediator, use of flocculation technique is also challenging because soluble dyes have high solubility. Furthermore, selection of best coagulant is very difficult with the advent of new dyes with complex structure (Verma, Dash, Bhunia, P. (2012). Hence, the solution to overcome these challenges in the treatment process is to use the electro-coagulation technique as a treatment process as it has numerous advantages. It has the potential to destabilize the small colloidal particle and also generate minimum amount of sludge. Furthermore, it is cost effective as it requires no additional cost and it is more readily filterable. The startup time for the operating the technique is also minimum Conclusion: The report on water and waste water treatment process in textile industry summarized the issue of generation of large amount of polluted effluent leading to environmental risk and health concerns for the community. With this issue, identification of the most appropriate treatment process for waste water effluent is critical to facilitate effective removal of waste. The evaluation of various techniques revealed various strength and limitations of the technique. Furthermore, based in the challenges identified in the treatment process, the electro-coagualtion process was considered the most effective in treating waste water effluent. Reference Aoudj, S., Khelifa, A., Drouiche, N., Hecini, M., Hamitouche, H. (2010). Electrocoagulation process applied to wastewater containing dyes from textile industry.Chemical Engineering and Processing: Process Intensification,49(11), 1176-1182. Carmen, Z., Daniela, S. (2012). Textile organic dyescharacteristics, polluting effects and separation/elimination procedures from industrial effluentsa critical overview. InOrganic Pollutants Ten Years After the Stockholm Convention-Environmental and Analytical Update(pp. 55-81). InTech: Croatia. Chan, S. H. S., Yeong Wu, T., Juan, J. C., Teh, C. Y. (2011). Recent developments of metal oxide semiconductors as photocatalysts in advanced oxidation processes (AOPs) for treatment of dye waste?water.Journal of Chemical Technology Biotechnology,86(9), 1130-1158. doi:10.1002/jctb.2636 Information about the textile industry - Efficiency Finder. (2017).Wiki.zero-emissions.at. Retrieved 26 May 2017, from https://wiki.zero-emissions.at/index.php?title=Information_about_the_textile_industry Khandegar, V., Saroha, A. K. (2013). Electrocoagulation for the treatment of textile industry effluent--a review.Journal of Environmental Management,128, 949-963. doi:10.1016/j.jenvman.2013.06.043 Khlifi, R., Belbahri, L., Woodward, S., Ellouz, M., Dhouib, A., Sayadi, S., Mechichi, T. (2010). Decolourization and detoxification of textile industry wastewater by the laccase-mediator system.Journal of Hazardous Materials,175(1), 802-808. Ozturk, E., Karaboyac?, M., Yetis, U., Yigit, N. O., Kitis, M. (2015). Evaluation of integrated pollution prevention control in a textile fiber production and dyeing mill.Journal of Cleaner Production,88, 116-124. Pang, Y. L., Abdullah, A. Z. (2013). Current status of textile industry wastewater management and research progress in Malaysia: a review.CleanSoil, Air, Water,41(8), 751-764. Savin, I. I., Butnaru, R. (2008). Wastewater characteristics in textile finishing mills.Environmental engineering and management journal,7(6), 859-864. Telke, A. A., Joshi, S. M., Jadhav, S. U., Tamboli, D. P., Govindwar, S. P. (2010). Decolorization and detoxification of Congo red and textile industry effluent by an isolated bacterium Pseudomonas sp. SU-EBT.Biodegradation,21(2), 283-296. Verma, A. K., Dash, R. R., Bhunia, P. (2012). A review on chemical coagulation/flocculation technologies for removal of colour from textile wastewaters.Journal of Environmental Management,93(1), 154. doi:10.1016/j.jenvman.2011.09.012